Configuration Options
3920Plus A
3920Plus B
Sample Port Rate Table
Cables
Cable 1
Cable 2
Cable 4
3920-A2-GN31-30
Use Sync Leased (Answer) default configuration options with the following
exception:
Auto Dial Back
Rate
Use Sync Leased (Originate) default configuration options with the following
exception:
Auto Dial Back
Rate
Port
Port 1
Port 2
Rate
28.8K
9600
9600
24.0K
9600
Disable
19.2K
9600
Disable
16.8K
9600
Disable
14.4K
9600
Disable
12.0K
Disable
Disable
9.6K
Disable
Disable
7.2K
Disable
Disable
4.8K
Disable
Disable
2.4K
Disable
Disable
Use a standard, customer-supplied, EIA-232-D/V.24 cable with a DB-25-P (plug)
connector at one end to attach to the modem. Attach this to the connector labeled
DTE1.
Use part number 125-0053-1431 (an 8-position, 8-wire modular cord that is
supplied with the modem). Attach this to the connector labeled LEASED.
Use part number 125-0067-0031 (a 6-position, 4-wire modular cord that is
supplied with the modem). Attach this to the connector labeled DIAL.
November 1996
Set to Enable.
Refer to Sample Port Rate Table in this section.
Set to Enable.
Refer to Sample Port Rate Table in this section.
Port 3
Port 4
4800
4800
4800
4800
4800
4800
Disable
4800
Disable
4800
Disable
4800
Disable
4800
Disable
4800
Disable
4800
Disable
Disable
Sample Configurations
G-9