Paradyne COMSPHERE 3920PLUS Installation And Operation Manual page 180

DCP Configuration
Table 4-12
(6 of 6)
V.42/MNP/Buffer Configuration Options — Singleport Mode
CellularEnhance: Disable
Nxt Disable Enable
This configuration option only appears when Async/Sync Mode is configured for Async, and Error Control
Mode is configured for V42/MNPorBfr, V42/MNPorDsc, LAPM_or_Disc, or LAPM_or_Bufr.
Cellular Enhancement. When enabled, the modem uses non-standard techniques to enhance V.42 operation for cellular
applications. It is still compatible, however, with modems which do not have the cellular enhancement implemented or
enabled.
The AT command is S-Register S91= n , where n is 0 for Disable and 1 for Enable.
RdcdAsyncBufSiz: Disable
End Disable Enable
This configuration option only appears when Async/Sync Mode is configured for Async, and Error Control
Mode is configured for BufferMode.
Reduced Asynchronous Buffer Size. When enabled, the modem's buffer size is limited to a maximum of 20 characters.
The AT command is S-Register S97= n , where n is 0 for Disable and 1 for Enable.
3920-A2-GN31-30 November 1996 4-63