Paradyne COMSPHERE 3920PLUS Installation And Operation Manual page 34

If the Model 3921Plus modem is to communicate with an installed SDCP, install the modem as
described above and perform the following steps:
3920-A2-GN31-30
1. Press the key on the SDCP. The Carr:Slot screen appears with the cursor on the
Select
slot selection position (01 on the first LCD line in following screen example).
Carr:Slot:
F1
2. Press the F1 ( ) or F2 (
3. If you have more than one carrier, press the
selection position (1: on the first LCD line in the following screen example).
Carr:Slot:
F1
4. Press the F1 ( ) or F2 (
The carrier number selection has a range of 1 to 8 since a single SDCP can control a
configuration of up to eight carriers. (This is only possible if the SDU is installed.)
5. Press the key to place the SDCP in direct communication with the selected
Select
modem.
The LCD displays the Top-Level menu for the selected modem. In addition, the Front
Panel LED on the modem's faceplate and the OK LED on the SDCP light.
November 1996
1:01A
1:01A
F3
F2
) key until the slot number you want appears.
key to move the cursor to the carrier
1:01A
1:01A
F2 F3
) key until the carrier number you want appears.
Modem Installation
2-9