Make Busy/Remove Make Busy - Paradyne COMSPHERE 3920PLUS Installation And Operation Manual

COMSPHERE 392xPlus Modems
Press the F1 key until the appropriate digital interface appears. Select the appropriate interface by
pressing the corresponding function key.
After selecting the desired interface, the message Command Complete appears on the bottom line
of the LCD and the selected interface appears in the xxxxx field.

Make Busy/Remove Make Busy

The Make Busy function forces the modem off-hook so it cannot answer a call. This is often used
with PBX systems to permit the busy out of a PBX port for rotary or hunt groups.
To access Make Busy from the Control branch, make the following selections:
Press the
The modem is now in a forced busy condition. Command Complete appears on the LCD.
To remove the modem from Make Busy mode, press the
RemoveMakeBusy appears.
3-40
The Port 1 interface is the only display allowed on the 3921 Plus
modem in Singleport mode, therefore the entire EIA LEDs branch is
masked.
To prevent violations of FCC and DOC regulations, this
function must only be used behind a user's PBX.
Control:
Make_Busy
F3
F1 F2
key until Make Busy appears. Select Make Busy.
Make Busy
Command Complete
F3
F1 F2
November 1996
NOTE
WARNING
key once and the key until
3920-A2-GN31-30