Display; User Programmable Screen - Danfoss mcd-500 Operating Instruction

7 Programming
7-16 Brake Time-2
Range:
1 sec* [1 - 30 secs]

7.12 Display

8-1 Language
Option:
English*
Chinese (中丈)
Spanish (Español)
German (Deutsch)
7
Portuguese (Português)
French (Français)
Italian (Italiano)
Russian (Русский)

7.12.1 User Programmable Screen

Selects which four items will be displayed on the programmable monitoring screen.
8-2 User Scrn Top L
Option:
Blank
Starter State
Motor Current
Motor pf*
Mains Frequency
Motor kW
Motor HP
Motor Temp
kWh
Hours Run
8-3 User Scrn Top R
Option:
Blank*
Starter State
Motor Current
Motor pf
72
Function:
Sets the duration for DC injection during a braking stop.
NB!
Parameter 7-16 is used in conjunction with Par. 7-11.
Function:
Selects which language the LCP will use to display messages and feedback.
Function:
Selects the item displayed in the top left part of the screen.
Displays no data in the selected area, allowing long messages to be shown without overlapping.
The starter's operating state (starting, running, stopping or tripped). Only available for "Top L" and
"Btm L".
The average current measured on three phases.
The motor's power factor, measured by the soft starter.
The average frequency measured on three phases.
The motor's running power in kilowatts.
The motor's running power in horsepower.
The motor's temperature, calculated by the thermal model.
The number of kilowatt hours the motor has run via the soft starter.
The number of hours the motor has run via the soft starter.
Function:
Selects the item displayed in the top right part of the screen.
Displays no data in the selected area, allowing long messages to be shown without overlapping.
The starter's operating state (starting, running, stopping or tripped). Only available for "Top L" and
"Btm L".
The average current measured on three phases.
The motor's power factor, measured by the soft starter.
MG.17.K2.02 - VLT ® is a registered Danfoss trademark
MCD 500 Operating Instruction