Parameter Programming; Control Panel; Front Keypad; Led Display - Danfoss OPTYMA Control User Manual

User Guide | Optyma™ control AK-RC 113 three phase
5.0 Parameter
programming

5.1 Control panel

5.2 Front keypad

5.3 LED display

© Danfoss | DCS (vt) | 2020.03
16
7 8 9 10 11
Auxiliary relay control
1
(controls the relays manual if parameter AU1/AU2 = 2/-2)
2
Up/Mute buzzer alarm
3 Stand by (if the system shuts down the LED flashes)
4
Room temperature setting
5
Down/Manual defrost
6
Room light
7
Cold room temperature parameter / settings
Stand-by icon
8
LED OFF = Electrical panel OFF
LED ON = Electrical panel ON and in regulation
LED flashing = Electrical panel in stand-by (outputs are disabled)
Door Switch / Room Light Icon
9
LED OFF = Door switch disabled or not in use and room light OFF
LED ON = Room light ON
LED Flashing = Door switch enabled and room light ON
Cold Call Icon
10
LED OFF = Cold call OFF
LED ON = Cold call ON
Fan Call Icon
11
LED OFF = Fan call OFF
LED ON = Fan call ON
LED Flashing = Fans paused after defrost (see parameter F4)
1
12 13 14 15 4
2 3
5 6
BC317523579312en-000101 | 9