Loggings; Main Menu; Parameters; Parameter Shortcut - Danfoss mcd-500 Operating Instruction

7 Programming

7.3.3 Loggings

The Loggings menu allows the user to view performance information in real-time graphs.
• Current (%FLC)
• Motor Temp (%)
• Motor kW (%)
• Motor kVA (%)
• Motor pf
The newest information is displayed at the right hand edge of the screen. The graph can be paused to analyse data by pressing and holding the OK
button. To re-start the graph, press and hold OK.

7.4 Main Menu

The Main Menu button provides access to menus for setting up the MCD 500 for complex applications and for monitoring its performance.

7.4.1 Parameters

7
Parameters lets you view and change all programmable parameters that control how the MCD 500 operates.
To open Parameters, press the Main Menu button then select Parameters.
To navigate through Parameters:
•
to scroll through parameter groups, press the
• to view the parameters in a group, press the OK button.
• to return to the previous level, press the BACK button.
• to close Parameters, press the BACK button.
To change a parameter value:
• scroll to the appropriate parameter and press OK to enter edit mode.
•
to alter the parameter setting, use the
• to save changes, press OK. The setting shown on the display will be saved and the LCP will return to the parameter list.
• to cancel changes, press Back. The LCP will return to the parameter list without saving changes.

7.4.2 Parameter Shortcut

The MCD 500 also includes a parameter shortcut, which allows you to directly access a parameter within the Parameters menu.
• To access the parameter shortcut, press the MAIN MENU button for three seconds
▲ ▼
•
Use the or button to select the parameter group.
• Press OK or BACK to move the cursor.
▲ ▼
•
Use the or button to select the parameter number.
Parameter shortcut
58
▲ ▼
or
▲ ▼
and buttons.
Please enter a
Parameter number
01-01
MG.17.K2.02 - VLT
button.
® is a registered Danfoss trademark
MCD 500 Operating Instruction