Mcd5-1600C) - Danfoss mcd-500 Operating Instruction

MCD 500 Operating Instruction
11 Bus Bar

MCD5-1600C)

NB!
Many electronic components are sensitive to static electricity. Voltages so low that they cannot be felt, seen or heard, can reduce the
life, affect performance, or completely destroy sensitive electronic components. When performing service, proper ESD equipment
should be used to prevent possible damage from occurring.
All units are manufactured with input and output bus bars at the bottom of the unit as standard. The input and/or output bus bars can be moved tot he
top of the unit if required.
Adjustment Procedure
MG.17.K2.02 - VLT ® is a registered Danfoss trademark
11 Bus Bar Adjustment Procedure
(MCD5-0360C - MCD5-1600C)
(MCD5-0360C -
11
93