Transmitting Message (Transmit) - JRC jue-87 Instruction Manual

3.8 Transmitting Message (Transmit)

The edited message is sent to the subscriber with some communication network. When the message is
sent, the communication network is selected in the ""Transmit" window.
The telex communication network is the mandatory facility for all LESs. Other facility depends on
each LES.
Transmit
Telex
E-mail
Facsimile
data (psDn)
data (psTn)
Closed network (dnid)
Special access network
cancel calL
The size of the transmission message in JUE-87 is 8000 bytes maximum. If the size of the message is
exceeded 8000 bytes, the following windows is displayed. In this case, reduce the size to 8000 bytes
or less divide the message to a few file.
Telex Communication Network.
E-mail Communication Network.
Facsimile (T30) Communication Network.
PSDN (X25, etc) Communication Network.
PSTN (V22, V32, etc) Communication Network.
DNID Communication Network.
Special Access Communication Network.
Cancel Call.
Fig.3.8a "Transmit" Window
WARNING
Size of the file exceeds 8000.
The MES can't transfer such file completely.
Fig.3.8b "WARNING !!!" Window
NOTE
Press F10 to continue.
3-36