Usb Drive Management Menu; Connect The Usb Drive; The Usb Drive Management Menu - JRC jue-87 Instruction Manual

3.7.3 USB Drive Management Menu

Remove USB drive :
Format USB drive :

3.7.3.1 Connect the USB Drive

When you connect USB drive, ACS mark is displayed at header area in the display during
•
recognizing the device.
When the USB drive installation succeeded, "The USB drive is installed and ready to use." is
•
displayed and the USB mark is displayed (ACS mark is disappeared).
When the USB drive installation failed, "The attached USB drive has malfunctioned, and DTE
•
does not recognize the attached USB drive. " is displayed.
When the USB device is noncompliant, "The attached USB drive is not supported. DTE supports
•
the USB drive only" is displayed.
You need your USB drive, when you use.
•
Do not remove the USB drive, while the USB drive LED which lights up when IME/DTE is
•
loading from or writing to the USB drive is lighting up. Otherwise, the data in the USB drive might
be destroyed.
When the USB Device is not connected, please close the rubber flap in order to maintain
•
waterproofing and dust-proofing.
JRC can not accept responsibility for any loss due to use virus-infected USB Device except product
•
guarantee condition and liability by law.

3.7.3.2 The USB Drive Management Menu

(1) Remove USB drive
When select "Remove USB drive" and press Enter key ,you remove the USB drive.
Step Operation
1
･Move the cursor to "Edit"
and press
Enter
2
･Select "Remove USB drive"
and press
Enter
3
･To remove the USB drive,
select and press
Yes
4
･When the processing is
succeeded, remove the USB
drive from IME/DTE.
To remove a USB drive.
To format a USB drive.
･"Edit" window is displayed.
key.
･"To stop the USB drive, choose Yes.
After the USB drive is stopped,
key.
the USB drive can be safety removed.
YES NO " is displayed
･When the processing is succeeded, "The USB drive can now
be safely removed from DTE. " is displayed and the USB mark
key.
Enter
is disappeared.
･When the processing is failed, " ERROR DTE failed to stop
the USB drive." is displayed.
･When USB Device is not connected, "DTE failed to detect the
USB drive" is displayed.
NOTE
IME/DTE Response
3-32