Position Updated - JRC jue-87 Instruction Manual

3.13.3.6 Position Updated

Renew the position information at fixed intervals with following below outlined procedures.
Set the "Data source" to "Manual" prior to enter a position information manually.
The position information from GPS is ignored within 60 minutes after manual entering.
Set the "Data source" to "GPS" to make the position information from GPS effective.
Step
•
1
Move the cursor to the "Distress" and press
key.
Enter
•
2
Move the cursor to the "Data source" and
press key.
Enter
•
3
Select the "Data source" and press
GPS: Ship's position is set from GPS data
Manual: Ship's position is set to manual.
4 •
Type the ship's latitude and press
•
Type the ship's Longitude and press
key.
Ex. North:
East: 139 30 35
N 3 5 5 0 2 0 Enter
E 1 3 9 3 0 3 5 Enter
5 •
When the ship's course is changed, press
key.
Enter
•
6
When the ship's course is changed, press
key.
Enter
•
7
When the ship's Speed is changed, press
key.
Enter
8 •
Type the ship's Speed and press
•
9
To return to Main menu, press
("Previous") or press
Note 1) When the ship's position has not been updated more than 4 hours, the "Enter new ship's
position" message is displayed.
When the ship's position has not been updated more than 8 hours from the displayed above
warning message, all geographical addresses and Safety NET message with priorities higher
than routine are received.
Note 2) When any GPS equipment is connected with the JUE-87, ship's position data is updated
automatically.
If GPS equipment is disconnected more than 3 minutes, it sounds and displays warning.
NOTE
Operation
Enter
Enter
Enter
35 50 20
key.
Enter
F10
key.
Esc
3-101
IME/DTE Response
"Distress" window is displayed.
The cursor is moved to right side.
When the "Gps" is selected, the cursor is
key.
moved to "lEs".
When the "Manual" is selected, the cursor is
moved to "Position".
The cursor is moved to "Course".
key.
The cursor is moved to right side.
The cursor is moved to "ship's Speed".
The cursor is moved to right side.
The cursor is moved to "lEs".
Main menu is displayed right side.
3