JRC jue-87 Instruction Manual page 132

(2) To delete the message
Step Operation
•
1
Move the cursor to
"read Out" and press
key.
Enter
•
2
Select the type of
message list you want to
see.
•
3
Press key to go to
F1
Delete mode.
•
4
Move the cursor to the
message you want to
delete, and press Space
bar (You can select a
number of messages in
same time).
•
5
To delete the selected
messages, press
("Delete") key.
•
6
Select OK .
IME/DTE Response
•
"Read-out" window is
displayed. It shows three
types of message list.
•
The message list you have
chosen is displayed.
Each message list displays
received messages in
chronological order.
(The newest message is
displayed at the top of list.)
•
"Delete mode" screen is
displayed.
•
Asterisk marks (＊) are
displayed on the head of the
lines you want to delete.
•
To delete the all message,
press
F7
Do you really want to delete
selected messages?
OK
•
The messages are deleted.
• "Message list " in read-out
mode is re-displayed when
deletion is completed.
F2 (select all) key.
Warning
Cancel
3-72
Remarks
•
"Inm-C":
"Inm-C message list"
"Egc" :
"Egc message list"
"All" :
"Reception message
list" (Received all
messages )
•
See Fig. 3.8a to 3.8c.
•
If you want to cancel the
deleting, press Space bar
once more to cancel it.
Then, Asterisk marks
(＊) are cleared and
deletion is cancelled.
Messages displayed on
warning dialog boxes are:
Do you really want to delete
All messages?
Do you really want to delete
Inm-C messages?
Do you really want to delete
EGC messages?