Mes Information Window - JRC jue-87 Instruction Manual

4.3.4 MES INFORMATION Window

The examples of the messages of Information window are listed in Table 4.3.4.
INFORMARION message
2nd LES ID Invalid
Because of Demand Assigned LES
Another Distress Alert initiated.
Are you sure you want to rename the file?
--Automatic test mode--
Normal communication disabled
Do not press any distress button unless you are in distress.
Can not create new file.
Cancelled Security Alert by No. ( ). SA Button.
Confirm the file name.
Current file name:
Data report (09-10-29 16:23) sent to DNID (12345)
Data report (003, 09-10-29 16:25) failed.
Delete file:
Distress Button is disconnected. Check the connection.
Distress acknowledgement received.
Distress Alert failed.
Distress Alert has been initiated.
Distress Alert has not been sent to NCS. Returning to
alternative NCS.
Distress Button is disconnected. Check the connection.
Distress Button No ( ) is connected incorrectly. Check the
connection.
------Distress Button Test-----
Distress button test succeeded.
If real distress alert to be sent, cancel the test mode.
------Distress Button Test-----
Now distress button testing.
If real distress alert to be sent, cancel the test mode.
Distress Buttons are under test now.
Now reading data.
Please wait.
Fig.4.3.4 MES INFOMATION Window
Table 4.3.4 MES INFORMATION Message
4-16
Countermeasure
Retry transmission.
Cancel the test mode when carry out real
distress alert transmission.
Do not turn off the power switch.
Do not turn off the power switch.