Dte (Data Terminal Equipment: Display Ndz-227 And Keyboard Ndf-369) - JRC jue-87 Instruction Manual

2.3.3 DTE (Data Terminal Equipment: Display NDZ-227 and Keyboard NDF-369)

DTE is composed of display and keyboard, and is connected to IME. DTE can be connected to USB
drive.
Do not use the DTE to other purpose.
It may cause a problem that unable to be transmitted in the emergency.
•
Do not use except the NDZ-227 DTE: otherwise DTE is not operated normally.
•
Do not use except specified DTE-IME cable: otherwise the IME is damaged.
•
In case of no key-instruction for a given length of time(depends on the setting) under DTE operating
mode except any communication, any display is disappeared automatically.
Display
(1)
Screen Angle
Adjust Knob
Keyboard
(1) Screen Angle Adjust Knob
Used to adjust the screen angle to clearly.
(2) LED
POWER
Illuminates when power has been supplied.
(3) LED
READY
Illuminates when communication is possible
CAUTION
NOTE
Fig.2.2.3 DTE
(4)
COMM
Illuminates in communication.
(5)
Dimmer
Used to adjust the screen and each LED
(POWER/READY/COMM) dimmer.
(6)
USB
Connect an USB flash memory.
2-16
(2)
POWER LED
(3)
READY LED
(4)
COMM LED
(1)
Screen Angle
Adjust Knob
(5)
Dimmer BUTTON
(6)
USB PORT
LED
BUTTON
PORT