Initial Setting; Selecting Preferred Ocean Region (Ncs/Les Info) - JRC jue-87 Instruction Manual

3.5 Initial Setting

After turn on the JUE-87 MES, set the following parameters;
(1) Selecting Preferred Ocean Region
(2) Setting Date & Time
(3) Setting Peripheral Function

3.5.1 Selecting Preferred Ocean Region (Ncs/Les info)

When a particular ocean region is selected, the MES will scan the NCS common channel only in the
ocean region selected.
1)The Selecting Preferred Ocean Region command is available, when the first line of the screen is
displayed "Ready", "Log-out", or "EGC only".
2)In case of "All ocean region" setup, if MES does not receive NCS common channel more than
30minutes, MES automatically scans all ocean region and tunes new NCS common channel. However,
MES automatically does not login. Please login manually. (The information is displayed on IME/DTE
screen to user.)
Step
Operation/Response (Example)
•
1
Move the cursor to
"Ncs/les-info" with
using the arrow keys and
press key.
Enter
•
2
Move the cursor to
"Preferred ocean
region" and press
key.
•
3
Confirm the cursor is at
"All ocean region" and
press key.
Enter
4 •
To return to Main menu
screen, press
NOTE
Screen (Example)
•
The "Ncs/les
information"
window is
displayed.
•
The "Preferred
ocean region"
window is
Enter
displayed.
•
Status display is
changed from
"Ready" to
"Scan".
•
Windows are
key. disappeared.
Esc
3-11
Remarks
•
When you want to change a
parameter, move the cursor to the
item you want and press
key.
•
You cannot set up when the status
in the first line on the main menu
is "Tune".
•
In this case, change the parameter
during "Log-out" or "EGC only"
displayed in the first line (about 3
seconds), by switching the IME
power source OFF and ON.
3
Enter