JRC jue-87 Instruction Manual page 165

Step Operation
1 •
Hold down
Alt
key on Main Menu.
•
2
Move the cursor to "distress button
Test" and press
•
3
When the distress button is tested,
press the distress button till the buzzer
sounds for about 5 seconds or more.
•
When the distress button test is
terminated, press
•
4
(It passes 5 sec after pressing the
distress button.)
•
key and press
A
•
key.
Enter
•
•
("Cancel") key.
F7
•
•
•
3-105
IME/DTE Response
"Diagnostics" window is displayed.
Diagnostics
Data source contents
Alarm history
software Version
distress button Test
F10: Previous
"Distress Button test mode" window is
displayed.
Distress button test mode
Distress buttons are under test now.
Press the distress button to test it.
If real distress alert to be sent,
Cancel the test mode.
The buzzer in DTE and IME is sounding 0.5
sec on, 1.0 sec off. Then, "SOS" is displayed
at the first line of DTE
The buzzer sounding for about 30 seconds.
The buzzer in DTE and IME is sounding 0.5
sec ON, 0.5 sec OFF.
The "Distress" lamp on IME is blinking 0.5
sec ON, 0.5 sec OFF.
"Distress Button Test" window is displayed.
--- Distress Button Test ---
Now distress button testing ---
F10: Cancel
3
F10: Cancel