JRC jue-87 Instruction Manual page 100

Step
•
24
After confirmation of each
parameter, press
key.
25
•
26
After the message is transmitted to
subscribers, "S&F message
delivered to subscribers" is
displayed. Press
key to return to main menu.
Note 1) Message can be sent to up to 5 subscribers whom destination code is same, by moving the
cursor to "Destination code-subscriber's number, and answerback code" with pressing
key (Multi address function).
Enter
When the subscriber's number set to two numbers or more, "*" is displayed at right side of
the number.
Note 2) When the entered file is not in the IME/DTE memory or the USB drive, the following
window is displayed, press
Operation
("Send Call")
F1
("Previous")
F10
("Previous") key and type the new file name.
F10
The file is missing.
Confirm the file name.
Fig.3.8.1b "ERROR" Window
IME/DTE Response
•
The contents of the
selected file are
displayed, and then
Main menu is
displayed again.
• "S&F message
(96-01-15 11:00) sent
to LES (203)" is
displayed.
•
Example: Call date
and time:
1996/1/15
11:00
LES ID: 203
•
When the "Message
print on function" is
turned on, the call
time, date destination
number, LES ID, and
the message are
printed out.
• "S&F message
(96-01-15 11:00)
delivered to
subscribers
(07202822351)" is
displayed.
•
Example: Delivery
date and time:
1996/1/15
11:00
Destination number:
07202822351
ERROR
F10:Previous
3-40
Remarks
•
Normally, it takes
about 3-5 minutes
to complete the
communication.
•
Press
F10
("Previous") key to
delete the message.
•
Press
F10
("Previous") key to
delete the message.