JRC jue-87 Instruction Manual page 196

INFORMARION message
Now printing. Please wait.
Now reading data. Please wait
Performance test failed.
Please turn off Security Button for real Security Alert.
Previous request (144, 92-04-14-08:10) is cancelled with
new request.
Really quit without saving? [Yes] [No]
Request (144, 92-04-14-08:10) cancelled.
Request (144, 92-04-14-08:10) failed.
Request (144, 92-04-14-08:10) failed. Automatic request
will be re-sent in 5minutes.
Request (92-04-14-08:10) failed. Now retrying to request.
Request (144, 92-04-14-08:10) queued. Now waiting for
announcement.
SB test is incomplete. Confirm ALL SBs are OFF. Turn
off IME and DTE.
------ Security Button Test ------
Now security button testing． ． ． ． ．
If real security alert to be sent, cancel the test mode.
------ Security Button Test ------
Security button test succeeded.
If real security alert to be sent, cancel the test mode.
Sending Distress Alert to alternative NCS.
Sending Distress Message.
S&F message (92-04-14-08:10) delivered to subscribers
(072123456, 07202822351)
S&F message ( ) No delivered.
S&F message (92-04-14-08:10) sent to LES (144).
The attached USB drive has malfunctioned, and DTE does
not recognize the attached USB drive.
The attached USB drive is not supported. DTE supports
the USB drive only.
When the display doesn't disappear, the
breakdown of the printer is thought. In
this case, please OFF/ON it the power
supply of the printer.
Do not remove a diskette during data
reading.
Select [Yes] to save the data.
Retry transmission.
Wait until re-transmission is completed.
Wait the announcement from LES.
Carry out "cancel call" of "Transmit"
when you close down the call request.
To receive the notification of delivery to
other party, make "Delivery
Confirmation" to "ON" at "Transmit"
window.
Connect the USB drive again. If the same
window is displayed, the USB drive
might have a failure. Connect another
USB drive.
4-18
Countermeasure