Step
・ Move the cursor to setting "LCD/LED
1
dimmer button setting" with using the
arrow keys and press
・Move the cursor to the following three
step, you want to change (Maximum,
2
Typical or Minimum) and press Enter
key.
・Enter the value you want , and press
Enter key. Setting range is from 1 to 15.
3
As the value rise, the LCD/LED lights up.
3.6.3 Screensaver Setting
Screensaver setting sets screensaver function and starting time.
3.6.3.1 Function ON/OFF
This menu can set the screensaver function ON/OFF state.
Step
・Move the cursor to setting "Function
ON/OFF" with using arrow keys and press
1
Enter key.
・Choose "ON" or "OFF" from the pull
down menu and press Enter key.
2
3.6.3.2 Starting Time
This menu can set the time between the last key operation to starting up screensaver. Setting range is
from 1 to 15 (min).
Step
・Move the cursor to setting "Starting
time" with using arrow keys and press
1
Enter key.
・Enter the value you want , and press
2
Enter key.
Operation
key.
Enter
Operation
Operation
3-17
IME/DTE Response
・The cursor is move to next step.
・The cursor is move to the setting area.
・Change the setting to new one.
IME/DTE Response
・The cursor is move to the setting area.
・Change the setting to new one.
IME/DTE Response
・The cursor is move to the setting area.
・Change the setting to new one.
3