JRC jue-87 Instruction Manual page 127

• Starting date and time
• Requesting interval
• LES
• Network type
• Destination code & subscriber's number
• Character code
• Data type
Set the date and time you want to start for a scheduled
transmission.
Set the interval time of schedule. (Minimum 10 minutes)
Set the LES IDs you want to use, in all ocean regions.
The first field is West AOR (000-063), the second field is
East AOR (100-163), the third field is POR (200-263) and
the fourth field is IOR (300-363).
Set the network type you want to use. You can choose
one of the following networks:
• E-mail
• Telex
• PSTN
• Facsimile
• PSDN (Data transmission)
• Closed network.
• Special access.
Set the destination code and subscriber's number.
Set the character code you want to use over the satellite
link.
Set the data type you want to send.
You can choose the following messages:
• Position data (QTH):
Choose the on or off of the position data transmission,
Position data is automatically updated when navigation
equipment (GPS, etc.) is connected. Use the
information you inputted at the section of "Distress"
when no navigation equipment is connected.
• Data source (dS)
* "1" and "2" means data source number.
3-67
Network type
E-mail
Telex
pstN
Facsimile
psDn
Closed net (dnid)
Special access
F10: Previous
3