Chapter 33: Static Port Trunk Commands; Table 45. Static Port Trunk Commands - Allied Telesis AT-9000/28 Command Line User's Manual

Chapter 33
Static Port Trunk Commands
Command
"NO STATIC-CHANNEL-GROUP" on
page 436
"PORT-CHANNEL LOAD-BALANCE"
on page 437
"SHOW STATIC-CHANNEL-GROUP"
on page 438
"STATIC-CHANNEL-GROUP" on
page 439
The static port trunk commands are summarized in Table 45.

Table 45. Static Port Trunk Commands

Port Interface
Static Port
Trunk Interface
User Exec and
Privileged Exec
Port Interface
Mode
Removes ports from existing static
port trunks and deletes trunks from
the switch.
Sets the load distribution methods of
static port trunks.
Displays the specifications of the
static port trunks.
Creates new static port trunks and
adds ports to existing port trunks.
Description
435