Chapter 33: Static Port Trunk Commands; Table 48. Static Port Trunk Commands - Allied Telesis AT-9028 User Manual

Chapter 33
Static Port Trunk Commands
Command
"NO STATIC-CHANNEL-GROUP" on
page 450
"PORT-CHANNEL LOAD-BALANCE"
on page 451
"SHOW STATIC-CHANNEL-GROUP"
on page 452
"STATIC-CHANNEL-GROUP" on
page 453
The static port trunk commands are summarized in Table 48.

Table 48. Static Port Trunk Commands

Port Interface
Static Port
Trunk Interface
User Exec and
Privileged Exec
Port Interface
Mode
Removes ports from existing static
port trunks and deletes trunks from
the switch.
Sets the load distribution methods of
static port trunks.
Displays the specifications of the
static port trunks.
Creates new static port trunks and
adds ports to existing port trunks.
Description
449