Filling Up With Gear Oil; Removing The Engine From The Universal Mounting Rack - KTM 450 EXC-R EU Repair Manual

30/ASSEMBLING ENGINE

Filling up with gear oil

Removing the engine from the universal mounting rack

Thoroughly clean the plug, gear oil screen and gear oil drain plug. Check parts for
damage and wear. Replace damaged or worn parts.
Clean the sealing surfaces on the engine.
Refit gear oil drain plug with seal ring and tighten it.
Specification
Gear oil drain plug with magnet
Refit plug of gear oil screen with O-rings and tighten it.
Specification
400365-10
Plug, gear oil screen
Remove the screw cap
Gear oil
Mount and tighten screw cap
700033-11
Remove the screw/nut from the special tool.
Engine holder (78029002000) (
Remove the engine from the universal mounting rack.
700020-01
M12x1,5
M16x1,5
and fill up with gear oil.
0.9 l (0.95 qt.) Engine oil (SAE 10W/50) (
.
P. 182)
112
20 Nm
(14.75 lbf ft)
20 Nm
(14.75 lbf ft)
P. 174)