Setting The Clock - KTM 450 EXC-R EU Repair Manual

14/LIGHT SYSTEM, INSTRUMENTS

Setting the clock

Condition
The motorcycle is standing.
Press the button
the display.
Press the button
The hour display flashes.
Set the hour display with the button "+" and/or button " ".
Press the button
The next segment of the display flashes and can be set.
You can set the following segments in the same way as the hours by pressing the
button "+" and the button " ".
400330-01
Info
The seconds can only be set to zero.
Press the button
The settings are saved and the Setup menu closed.
Info
If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu closed.
briefly and repeatedly until CLK appears at the bottom right of
for 3 - 5 seconds.
briefly.
for 3 - 5 seconds.
55