Table of Contents
Advertisement
32/CLUTCH
Fill the bleeding syringe
Bleed syringe (50329050000) (
Brake fluid DOT 5.1 (
On the slave cylinder, remove the bleeder screw
500158-10
Inject the liquid into the system until it escapes from the bore hole
ter cylinder without bubbles.
To prevent overflow, drain fluid occasionally from the master cylinder reservoir.
Remove the bleeding syringe. Mount and tighten screws bleeder screw.
Correct the fluid level of the hydraulic clutch.
Specification
Fluid level under top level of container.
Check parts for damage and wear. Replace damaged or worn parts.
400340-10
Position the cover with the membrane. Mount and tighten screws.
Info
Clean up overflowed or spilt fluid immediately with water.
with the appropriate hydraulic fluid.
P. 177)
P. 174)
and fit the bleeding syringe
4 mm (0.16 in)
130
.
of the mas-
Advertisement
Table of Contents
