31/CARBURETOR
Removing the carburetor
Disassembling the carburetor
Dismount the fuel tank. (
Remove the carburetor connection boot. (
Remove screw
Push back bellows
500109-10
Undo nuts
Undo hose clip
Pull engine vent hose
500110-10
Unplug the connector of throttle valve sensor TPS
Unthread the carburetor vent hoses. Pull the carburetor out of the rubber sleeve
and remove it.
(EXC-R EU)
Twist out the choke slide and hang it to one side together with the Bowden ca-
ble.
500111-10
Remove the carburetor. (
Remove screws
700034-10
Remove screws
700035-10
P. 28)
. Remove the carburetor cover.
.
, detach the Bowden cables and hang them to one side.
.
off of the carburetor.
P. 115)
and detach all vent hoses from the carburetor.
. Take off the throttle slide cover and seal.
P. 27)
.
115