Table of Contents
Advertisement
07/FUEL TANK, SEAT, TRIM
Opening filler cap
Closing filler cap
Removing the seat
Mounting the seat
Dismounting the fuel tank
Danger
Fire hazard Fuel can easily catch fire.
Never fill up the vehicle near open flames or burning cigarettes, and always switch off the engine first. Be careful that no
fuel is spilt, especially on hot vehicle components. Clean up spilt fuel immediately.
Fuel in the fuel tank expands when warm and can escape if the tank is overfilled. See specifications on filling up with fuel.
Press release button
400199-10
Replace the filler cap and turn clockwise until the release button
Info
Run the fuel tank breather hose
400199-11
Remove screw
above.
500080-10
Check parts for damage and wear. Replace damaged or worn parts.
Hook the front of the seat into the flange adapter of the fuel tank, lower the rear of
the seat and simultaneously push it forwards.
Make sure that the seat is correctly locked in.
Mount and tighten the screw of the seat fixing.
Specification
Remaining screws, chassis
500068-01
, turn filler cap counterclockwise and lift it free.
without kinks.
. Lift up the seat at the rear, pull it back and then remove from
M6
28
locks in place.
10 Nm
(7.38 lbf ft)
Advertisement
Table of Contents
