Setting The Building Manager - Mitsubishi Electric AG-150A Instruction Book

10-2 Setting the Building Manager

To change the Building Manager name and/or password, or enable/disable functions, touch [Building Manager User] on the screen that
appears when [User Info] is touched on the setting change screen.
Note: If the user logs in as a building manager, the present status can be checked, but cannot be changed.
(1) Changing the building manager name
To change the building manager name, touch the user name input button, and enter the user name on the keyboard that appears in 20
characters or less.
(2) Changing the password
To change the building manager password, touch the password input button, and enter the password that is between 3 and 10 character
long on the keyboard that appears. Press Retype Password, and enter the same password again.
* On the screen, password will appear as asterisks with each * representing a character.
Press the [Save setting] button to reflect the new user name and password.
* The same user name and password are used to log in to Web browser.
User name input
button
(3) Making the settings for available functions
Touch the function to enable the function (An orange frame will appear around the selected item), or touch the selected item again to
deselect it (no orange frame). Press the [Save setting] button to save the changes.
* This setting is valid only on the LCD screen and will not be reflected on the Web browser.
Password input
button
– 94 –
Save Settings
Password button
(for retyping)