Mitsubishi Electric AG-150A Instruction Book page 29

• Icons
The following icons are used on the screen.
* The display settings can be changed for each group.
* Those icons listed as common icons can be used to display air conditioning units, LOSSNAY units, and general equipments.
Air To Water
(Booster and
Water Hex Unit)
HWHP (CAHV)
(Hot Water Heat
Depending on the status of each group, the following icons will appear on the icons mentioned above.
During an error
During energy-save
control
* During energy-save operation, the energy-save icon will appear over the intake air temperature.
* When setting ventilation interlock with Mr. Slim units (M-series units, P-series units), the air conditioning and interlocked ventilation icon
will display ON even when the interlocked LOSSNAY is operating by itself.
(This will occur when used with the following M-NET adapter: PAC-SF48/50/60/70/80/81MA-E)
* When multiple AG-150A controllers are connected by connecting an Expansion controller to the system, "Schedule setting enabled,"
"Schedule setting Not Available," "During energy-save control," and "During night setback" will be displayed only on the AG-150A
controller that is executing these functions.
* The energy saving icon is displayed while the energy-saving control is performed in a group of indoor units and in the outdoor unit
belonged to that group.
* If a given LOSSNAY unit is interlocked with multiple indoor unit groups, the LOSSNAY unit may be in operation even when the display
shows that the unit is stopped.
* Switching between display or non-display of Intake air temperature display is possible on the LCD display and the Initial setting screen
(except the display of water temperature on the Air To Water (PWFY) unit).
Common
General
equipments
(PWFY)
Pump Unit)
Interlocked unit ON
Intake air
temperature display
Schedule setting
Interlocked unit OFF
Unknown (during
During night setback
– 28 –
Schedule setting
enabled Not Available
Filter sign is
initial startup) detected.