Mitsubishi Electric AG-150A Instruction Book page 40

Air-conditioner control system centralized controller
Hide thumbs Also See for AG-150A:
Table of Contents

Advertisement

(4) Copy a schedule to another day of the week or to another group
(5) Save the contents of schedule
• Schedule setting screen
1. Setting Time
Function
1
Setting Time
Touch the  buttons
to set the start time.
2
ON/OFF/
Select the operation
Optimized Start
status (ON, OFF,
Optimized start).
Note: When CITY MULTI S Series (PUMY) is used, set the temperature at 17°C/63°F or above in heating mode.
* Refer to the explanation of operation screen on page 29 for other items.
Copy button
Paste button
Operation method
Touching the  button will increase the value by one, and touching the  button will
decrease the value by one (settable in 1-minute increments).
An orange frame will appear around the selected button.
Note: When [Optimized Start] is selected, set the operation mode and preset
Note: Air To Water (PWFY) and LOSSNAY have no Optimized Start function.
To copy the schedule of a given day to another day, select the days of
the week from the weekly schedule setting screen, touch [Copy] to
select it, select a day to copy the schedule to, and touch [Paste].
To copy the weekly schedule for one group to another group, select
the group from the weekly schedule setting screen (Floor layout or
block display screen), touch [Copy], select a group to copy the
schedule to, and touch [Paste].
* The settings of one type of equipment cannot be copied to the
settings of a different type of equipment. (i.e., The settings of air
conditioning units cannot be copied to ventilation equipment
(LOSSNAY) settings.)
* Available operation modes and setting temperature range varies
with models.
Copy destination frame
A pale orange frame appears
around the copy destination unit.
After all the settings have been made, touch the [OK] button to save
the schedule settings.
Touch the [Cancel] button to go back to the previously saved settings
without making any changes.
2. ON/OFF switch
temperature as well. If "Prohibit Remote Controller" is set at the same time,
remote controller is prohibited at its setting time.
– 39 –
Display

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ag-150a-a

Table of Contents