Mitsubishi Electric AG-150A Instruction Book page 102

11-4-1 Charge parameter data
The format of the CSV file that is output when the charge parameter is saved is as follows:
Note: Dates in the folder name, the file name,and the file contents are displayed in the format selected on the Unit Info screen.
"March 10, 2010" would be expressed
as [10/03/2010] in the [dd/mm/yyyy] format,
as [03/10/2010] in the [mm/dd/yyyy] format, and
as [2010/03/10] in the [yyyy/mm/dd] format.
[File name]
• Without connection to an Expansion controller
ChargeParameter_[yyyy]-[mm]-[dd]A[Indoor unit address (fixed 2 digits)]-[Time zone (1-5)*].csv
(yyyy: year, mm: month, dd: date)
Example) ChargeParameter_2010-03-10A01-1.csv
• With connection to an Expansion controller
ChargeParameter_[yyyy]-[mm]-[dd]A[Expansion Controller Number(1-3)][Indoor unit address (fixed 2 digits)]-[Time zone
(1-5)*].csv(yyyy: year,mm: month,dd: date)
Example) ChargeParameter_2010-03-10A1-01-1.csv
*Time Periods 1 through 5 can only be set from TG-2000A.
When shipped from the factory, only Time Period 1 is settable.
[File contents]
The format of each CSV file is as follows. Each file contains up to 62 days of data.
* Delimiter ("," or ";") and decimal point ("." or ",") that are used by the CSV file are selected on the Initial Setting Web.
1st line
2nd line
3rd line
4th line
5th to 66th line (max.)
* Charge parameter data range is 0 through 999999. If the count value exceeds the maximum value, the count value goes back to 0.
* The file is not output until the operation starts because the data does not exist.
* When the Energy Management License Pack or Charge License has not been registered, the file is not output.
* Charge License can be registered only on AG-150A-A.
Example) Without/With connection to an Expansion controller
201
2010/03/10-2010/03/12
Address 01
Date,SaveValue,TermoTime,FanTime,SubHeaterTime
2010/03/10,57,150,0
2010/03/11,76,122,178,0
2010/05/12,84,134,194,0
Item
File class Charge parameter: 201
Data range Start date + "-" + End date
Target trend "Address" + M-NET address
Item "Date, SaveValue, ThermoTime, FanTime, SubHeaterTime"
date, save value, thermo time, fan time, sub heater time
Data * The value for each data type is a cumulative value since the
Format
beginning of operation.
– 101 –