Operation Condition Monitoring - Mitsubishi Electric AG-150A Instruction Book

6-1 Operation condition monitoring

• This function displays the ON/OFF/Malfunction status of specific units, groups, block, or floor.
Group icon
Floor-switching button
Button used to switch
the floors
Area selection frame
Indicates which area on
the floor is displayed on
the screen.
Zoom-out button
Deselect-all button
Cancels all group selections
• Display image of floor layout function (P72-P76)
(1) Operation method
• Note that methods are different for group operation, block operation, floor operation, and batch operation for the entire building.
<Group display (detailed icons)>
Zoom-out button
Equipment type selection screen
Select-all button
Selects all groups
Select-all-groups-on-the-floor button
Selects all groups on the currently selected floor
The following icons indicate the operation status.
: On
: Off
: Error
* If there is a device that cannot be identified,
icon of the device.
• Selecting the group icon and then pressing the operation button will
take the screen to the operation screen for the selected group.
(If more than one groups exist within a group, such as air
conditioning unit group, ventilation unit group (LOSSNAY and OA
handling units), Air To Water (PWFY) unit, and general equipment
group, a screen to select a group will appear. After the models have
been selected, the operation screen will appear.) On the screen,
detailed information about the ON/OFF, temperature, fan speed, air
flow direction, prohibit/permit status of the remote controller,
operation mode, and Schedule Available/Not Available can be
checked.
• Pressing the zoom out button will take the screen to the list screen.
• By pressing the floor switching button, the settings for the air
conditioning units on other floors can be checked.
* "Booster unit" and "Water HEX unit" will appear as "Air To Water
(PWFY)".
– 26 –
Weekly schedule number
Indicates the weekly
schedule number that is
currently effective.
Number of units in error
Indicates the number of units
that are in error.
Number of units whose
filter sign is turned on
Indicates the number of units
whose filter sign is turned on.
Group selection frame
Indicates the group that is
selected
Operation button
will appear over the