Mitsubishi Electric AG-150A Instruction Book page 92

9-2-3 Setting of lower/upper limit temperature
After setting the time period, lower/upper limit temperature for each group can be set.
Touch lower/upper limit temperature setting button to show the screen below.
Set the temperature by pressing  button. When [--] is set, setback
control will not be operated. After setting, press OK to reflect the
setting. Setback setting screen will be shown. If the temperature is not
changed, touch [Cancel].
Note: The setting : lower limit temperature < upper limit temperature
Note: The settable temperature varies depending on the model.
Note: When CITY MULTI S Series (PUMY) is used, set the
temperature at 17°C/63°F or above in heating mode.
After setback setting screen is shown, check the changed items.
Touch [Save settings] button to reflect the changes immediately.
– 91 –
Lower/Upper limit
temperature setting
button