Checking The List Of Units With A Triggered Filter Sign - Mitsubishi Electric AG-150A Instruction Book

6-5 Checking the List of Units with a Triggered Filter Sign

Touching [Status List] on the Main operation screen and then touching [Filter signs] in the sub menu will bring up a list of units whose
filter sign is turned on.
1Floor name or
Block name
Floor name or
block name is
displayed here.
2Group name
The name of the
group is displayed
here.
3Unit address
The unit address is
displayed here.
Item
1Floor name or Block name
2Group Name
3Unit address
4Number of units withtriggered
filter signs
5Reset units individually
6All reset
The name of the floor or block appears here that contains the unit whose filter sign is turned on.
* If the unit in error has not been registered in a block or floor, this area will be blank.
The name of the group appears here that contains the unit whose filter sign is turned on.
The address of the units with its filter sign turned on appears here.
If an Expansion controller (EC) is connected, this field will appear in the "EC No.- unit address" format
(e.g., : [1-012]).
The number of units with currently triggered filter signs is displayed.
Touch [Reset] when you want to reset the filter sign for the group the units belong to.
(Reset the filter sign after cleaning the filter.)
Touch [All Reset] when you want to reset the filter sign on all units with a triggered filter sign at once.
Description
– 50 –
4Number of
units with
triggered filter
signs
The number of
units with currently
triggered filter
signs is displayed
here.
5Reset units
individually
Touch to reset the
filter sign for the
group the units
belong to.
6All reset
Touch to reset the filter
sign on all units with
triggered filter signs.