Floor Layout Setting - Mitsubishi Electric AG-150A Instruction Book

7-10 Floor Layout Setting

To change the floor layout on the main operation screen or to change the display position of the groups on the floor, touch the [Floor
layout] tab in the setting change screen.
Note: If the user logs in as a building manager, some of the operations may be prohibited.
Floor switching
button
Unregistered floor
area
Basic floor setting
button
7-10-1 Making the floor settings
Touch the basic floor setting button to bring up the basic floor setting screen.
Number of floors
setting button
Layout selection
button
(1) Setting the floor number and layout
Icon Cut button Icon Paste button
Select the total number of floors on the basic floor setting screen with
the up/down arrow buttons, and select the desired type of floor layout.
Not all types of floor layouts may not be available, depending on the
number of floors.
* No. of floors = 1-3: All floor layouts are selectable.
* No. of floors = 4-5: [1 row×1 column][2×1][1×2][3×1][2×2] are
selectable.
* No. of floors = 6-8: [1 row×1 column][2×1][1×2] are selectable
* No. of floors = 9-10: [1 row×1 column] are selectable
* When "--" is selected in Number of floors setting, only unregistered
floor area is shown and Layout selection buttons are not available.
Note: When the floor or layout is reduced, the reduced icons move to
unregistered floor area.
Note: The default layout consists of two rows and one column.
– 72 –
Group Number
Save Settings
Floor level button
Floor Name button