Wilfa bma-25 Instruction Manual page 87

The bread maker has 63 independent program settings for bread and cake. In addition, there are
programs for JAM, BAKING, PIZZA DOUGH AND DOUGH. There are therefore 68 different
programs.
14. Alarm function when program is finished
Automatic finish setting. When the program is finished, a signal warns the user that the food is
finished.
15. Timer
Set the lengthened time to finish a chosen program. The timer can be set to increase by 10-minute
periods, and maximum lengthened time is about 15 hours.
16. Display function
The time in the display counts down minute by minute until it reaches 0.
17. Heating function
After baking is completed, the bread maker proceeds to a "Stay warm" mode to keep the bread fresh
and warm.
6. Signal Descriptions and Functions
a. Electricity on
b. Correct button
c. Incorrect button
d. Add ingredients
e. Procedure completed
f. High or low temperature
When baking process starts
g. Baking time adjusted
h. Raising time adjusted
12. Warning functions to increase raising time.
Increase raising time by periods of 10 minutes at a time, 5 minutes before the end of the raising
process. A signal will sound with 4 second intervals for 1 minute. If you think the raising time is
less than required, you can lengthen the raising time for 10 minute periods by pressing CHOICE
once. The finish time will be displayed inclusive of the time increase.
5 minutes before the end of the raising time, the bread maker will give the option of increasing the
raising time again. The raising time can be set for a further 10 minutes or it may just be allowed to
work into the next phase.
13. Alert for increasing baking time.
Long tone
Short tone
Long tone
8 short tones
Short-long-short-long-short-long tone
2 long tones
Short tone with 4 second intervals lasting
1 minute.
Short tone with 2 second intervals lasting
1 minute.