Ordering - GE B30 UR Series Instruction Manual

2 PRODUCT DESCRIPTION
Table Notes:
1. RW = read and write access
2. R = read access
3. Supervisor = RW (default), Administrator = R (default), Administrator = RW (only if Supervisor role is disabled)
4. NA = the permission is not enforced by CyberSentry Security
CYBERSENTRY SERVER AUTHENTICATION
The UR has been designed to automatically direct authentication requests based on user names. In this respect, local
account names on the UR are considered as reserved, and not used on a RADIUS server.
The UR automatically detects whether an authentication request is to be handled remotely or locally. As there are only five
local accounts possible on the UR, if the user ID credential does not match one of the five local accounts, the UR automat-
ically forwards the request to a RADIUS server when one is provided.
If a RADIUS server is provided, but is unreachable over the network, server authentication requests are denied. In this situ-
ation, use local UR accounts to gain access to the UR system.
a) OVERVIEW
The B30 is available as a 19-inch rack horizontal mount or reduced-size (¾) vertical unit and consists of the following mod-
ules: power supply, CPU, CT/VT, contact input and output, transducer input and output, and inter-relay communications.
Each of these modules can be supplied in a number of configurations specified at the time of ordering. The information
required to completely specify the relay is provided in the following tables (see chapter 3 for full details of relay modules).
Order codes are subject to change without notice. See the ordering page at
http://www.gedigitalenergy.com/multilin/order.htm
NOTE
The order code structure is dependent on the mounting option (horizontal or vertical) and the type of CT/VT modules
(enhanced diagnostic CT/VT modules or HardFiber
following sub-sections.
b) ORDER CODES WITH ENHANCED CT/VT MODULES
The order codes for the horizontal mount units are shown below.
Table 2–4: B30 ORDER CODES FOR HORIZONTAL UNITS
B30 - * ** - * * * - F
BASE UNIT B30 | | | | |
CPU T | | | |
U | | | |
V | | | |
SOFTWARE 00 | | |
01 | | |
03 | | |
04 | | |
A0 | | |
A1 | | |
A3 | | |
A4 | | |
B0 | | |
B1 | | |
B3 | | |
B4 | | |
C0 | | |
C1 | | |
C3 | | |
C4 | | |
D0 | | |
D1 | | |
D3 | | |
D4 | | |
E0 | | |
E1 | | |
E3 | | |
E4 | | |
F0 | | |
F1 | | |
F3 | | |
F4 | | |
G0 | | |
G1 | | |
G3 | | |
G4 | | |
GE Multilin
for the latest options.
TM
process bus modules). The order code options are described in the
** - H ** - L ** - N ** - S ** - U
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
B30 Bus Differential System
** - W/X ** Full Size Horizontal Mount
| | Base Unit
| | RS485 with 3 100Base-FX Ethernet, multimode, SFP with LC
| | RS485 with 1 100Base-T Ethernet, SFP RJ-45 + 2 100Base-FX Ethernet, multimode, SFP with LC
| | RS485 with 3 100Base-T Ethernet, SFP with RJ-45
| | No software options
| | Ethernet Global Data (EGD) protocol
| | IEC 61850 protocol
| | IEC 61850 and Ethernet Global Data (EGD) protocols
| | CyberSentry Lvl 1
| | CyberSentry Lvl 1 and Ethernet Global Data
| | CyberSentry Lvl 1 and IEC 61850
| | CyberSentry Lvl 1, Ethernet Global Data, and IEC 61850
| | IEEE 1588
| | IEEE 1588 and Ethernet Global Data
| | IEEE 1588 and IEC 61850
| | IEEE 1588, Ethernet Global Data, and IEC 61850
| | Parallel Redundancy Protocol (PRP)
| | PRP and Ethernet Global Data
| | PRP and IEC 61850
| | PRP, Ethernet Global Data, and IEC 61850
| | IEEE 1588 and CyberSentry Lvl 1
| | IEEE 1588, CyberSentry Lvl 1, and Ethernet Global Data
| | IEEE 1588, CyberSentry Lvl 1, and IEC 61850
| | IEEE 1588, CyberSentry Lvl 1, Ethernet Global Data, and IEC 61850
| | IEEE 1588 and PRP
| | IEEE 1588, PRP, and Ethernet Global Dada
| | IEEE 1588, PRP, and IEC 61850
| | IEEE 1588, PRP, Ethernet Global Data, and IEC 61850
| | PRP and CyberSentry Lvl1
| | PRP, CyberSentry Lvl1, and Ethernet Global Data
| | PRP, CyberSentry Lvl 1, and IEC 61850
| | PRP, CyberSentry Lvl 1, Ethernet Global Data, and IEC 61850
| | IEEE 1588, PRP, and CyberSentry Lvl 1
| | IEEE 1588, PRP, CyberSentry Lvl 1, Ethernet Global Data
| | IEEE 1588, PRP, CyberSentry Lvl 1, and IEC 61850
| | IEEE 1588, PRP, CyberSentry Lvl 1, Ethernet Global Data, and IEC 61850
2.1 INTRODUCTION
2

2.1.3 ORDERING

2-7