GE B30 UR Series Instruction Manual page 143

5 SETTINGS
For the Device > Settings > Product Setup > Supervisory option, the panel looks like the following.
For the Security panel, the following settings are available.
RADIUS Server Settings
SETTING NAME DESCRIPTION
Primary RADIUS IP IP address of the main RADIUS server.
Address Default value indicates no Primary
RADIUS server is configured, and hence
RADIUS is disabled.
Primary RADIUS authentication port
Authentication Port
Primary Accounting RADIUS accounting port
Port
Vendor ID An identifier that specifies RADIUS
vendor-specific attributes used with the
protocol
RADIUS Shared secret used in authentication. It
Authentication displays as asterisks. This setting must
(Shared) Secret meet the CyberSentry password
requirements.
RADIUS Authentication method used by RADIUS
Authentication server. Currently fixed to EAP-TTLS.
Method
Timeout Timeout in seconds between re-
transmission requests
Retries Number of retries before giving up
GE Multilin
Figure 5–3: SUPERVISORY PANEL
MIN
0.0.0.0
1
1
See the
following
password
section for
requirements
EAP-TTLS
0
0
B30 Bus Differential System
5.2 PRODUCT SETUP
MAX DEFAULT
223.255.255.254 0.0.0.0
65535 1812 -
65535 1813 -
Value that
represents
General
Electric
See the following N/A
password section
for requirements
EAP-TTLS EAP-TTLS -
9999 10
9999 3
5
UNITS MINIMUM
PERMISSION
- Administrator
Administrator
Administrator
Administrator
- Administrator
Administrator
sec Administrator
- Administrator
5-17