Processor - HP ProLiant WS460c Gen9 Maintenance And Service Manual

Remove the thermal interface protective cover from the heatsink.
3.
CAUTION: To avoid damage to the system board, processor socket, and screws, do not
overtighten the heatsink screws.
Align and install the heatsink. Alternate tightening the screws until the heatsink is seated properly.
4.
Install the storage controller or connect the direct connect SATA cable
5.
cabling" on page 80).
Install all DIMM baffles
6.
Install the internal USB drive.
7.
Install the access panel.
8.
Install the graphics server blade.
9.

Processor

("DIMM baffles" on page 51).
("Direct connect SATA
Removal and replacement procedures 59