Hardware Options Installation; Processor Option; In This Section Processor Option - HP ProLiant BL45p User Manual

Hide thumbs Also See for ProLiant BL45p:
Table of Contents

Advertisement

Hardware options installation

Processor option..................................................................................................................................... 25
Hard drive option................................................................................................................................... 30
Memory option ...................................................................................................................................... 31
Fibre Channel mezzanine option ............................................................................................................. 32
NIC mezzanine option............................................................................................................................ 33
Battery-Backed Write Cache Enabler option .............................................................................................. 34

Processor option

Observe the following processor installation guidelines:
Processor socket 1 must be populated at all times or the server does not function properly.
When upgrading processor speed, always update the system ROM before installing the processor.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and
the internal system components to cool before touching them.
CAUTION: To avoid damage to the processor and system board, only authorized personnel should attempt
to replace or install the processor in this server blade.
CAUTION: To help avoid damage to the processor and system board, do not install the processor without
using the processor installation tool.
CAUTION: To prevent possible server blade malfunction and damage to the equipment, multiprocessor
configurations must contain processors with the same part number.
To install a processor:
Power down the server blade (on page 16).
1.
Remove the server blade (on page 17).
2.
Remove the access panel (on page 17).
3.
Hardware options installation 25

Advertisement

Table of Contents
loading

Table of Contents