Storage Controller - HP ProLiant WS460c Gen9 Maintenance And Service Manual

Storage controller

To remove the component:
Back up all graphics server blade data.
1.
Power down the graphics server blade (on page 25).
2.
Remove the graphics server blade
3.
Place the graphics server blade on a flat, level work surface.
4.
Remove the access panel
5.
Prepare the storage controller for removal.
6.
Remove the storage controller.
7.
To replace the component, reverse the removal procedure.
("Remove the graphics
("Access panel (graphics server
blade" on page 26).
blade)" on page 31).
Removal and replacement procedures 50