System Board - HP ProLiant WS460c Gen9 Maintenance And Service Manual

Press and hold the processor retaining bracket in place, and then close each processor locking
3.
lever. Press only in the area indicated on the processor retaining bracket.
Align and install the heatsink. Alternate tightening the screws until the heatsink is seated properly.
4.
Install all DIMM baffles
5.
Install the internal USB drive.
6.
Install the storage controller or connect the direct connect SATA cable
7.
cabling" on page 80).
Install the access panel.
8.
Install the graphics server blade.
9.

System board

("DIMM baffles" on page 51).
("Direct connect SATA
Removal and replacement procedures 63