Drive Blank - HP ProLiant WS460c Gen9 Maintenance And Service Manual

Remove the foam gasket (on page 27).
6.
Disconnect the power cable from the expander power board and the PCI graphics option.
7.
Remove the graphics expansion control cable.
8.
Remove the retaining block (on page 29).
9.
Remove the expansion blade PCIe card cage.
10.
To replace the component, reverse the removal procedure.

Drive blank

Remove the component as indicated.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server
unless all bays are populated with either a component or a blank.
To replace the blank, slide the blank into the bay until it locks into place.
Removal and replacement procedures 32