Mezzanine Assembly - HP ProLiant WS460c Gen9 Maintenance And Service Manual

Mezzanine assembly

To remove the component:
Back up all graphics server blade data.
1.
Power down the graphics server blade (on page 25).
2.
Remove the graphics server blade
3.
Place the graphics server blade on a flat, level work surface.
4.
Remove the access panel
5.
Remove the mezzanine assembly.
6.
To replace the component:
Align the mezzanine assembly with the guide pins on the system board, and then install the
1.
mezzanine assembly on the system board.
Press down firmly on the mezzanine assembly handles, and then close the mezzanine assembly
2.
latch.
("Remove the graphics
("Access panel (graphics server
blade" on page 26).
blade)" on page 31).
Removal and replacement procedures 34