Mxm Graphics Mezzanine Heatsink - HP ProLiant WS460c Gen9 Maintenance And Service Manual

Remove the screws to release the MXM board from the mezzanine GPU module.
7.
Remove the MXM board from the mezzanine GPU module.
8.
To replace the component, reverse the removal procedure.

MXM graphics mezzanine heatsink

The MXM board and the mezzanine GPU module components shown in this procedure might look
slightly different than your product. The procedure is not impacted by the difference in appearance of
the hardware.
To remove the component:
Power down the graphics server blade (on page 25).
1.
Remove the graphics server blade
2.
Place the graphics server blade on a flat, level work surface.
3.
Remove the access panel
4.
Remove the mezzanine assembly
5.
("Remove the graphics
("Access panel (graphics server
("Mezzanine assembly" on page 34).
blade" on page 26).
blade)" on page 31).
Removal and replacement procedures 40