Electrical Adjustment; Memory Function Of The Electrically Adjustable Seat - Skoda Octavia Owner's Manual

Electrical adjustment

Fig. 64 Control elements on the seat

Read and observe on page 76 first.
The seats can be adjusted by the respective operating element being pressed
in the direction of area of the arrow
seat adjustment
A
▶
1 - Move in the longitudinal direction
▶
2 - Change in inclination
▶
3 - Change in height
Adjusting the seat backrest
B
▶
4 - Change in inclination
Adjusting lumbar support
C
▶
5 - Change curvature
▶
6 - The degree of curvature change
WARNING
The electric front seat adjustment is functional even with the ignition off.
Therefore, when leaving the vehicle, never leave people who are not com-
pletely independent, such as children, unattended in the vehicle - there is a
risk of injury!
Note
If the inclination angle of the seat backrest relative to the seat surface is
greater than approx. 110°, then it is not possible for safety reasons to save this
setting in the memory of the electrically adjustable seats or the remote control
key.
» Fig. 64.

Memory Function of the electrically adjustable seat


Read and observe on page 76 first.
Among the memory buttons on the driver's seat, a setting for the driver´s
B
seat and exterior mirror position can be saved
Storing driver's seat and exterior mirror settings for the forwards drive
›
Switch on the ignition, adjust the seat and the exterior mirrors.
›
Press the  » Fig. 65 button and then, within 10 seconds, press the de-
A
sired memory button . Storing is confirmed by an acoustic signal.
B
Storing front passenger´s exterior mirror settings for reversing
The function for lowering the passenger-side mirror surface when reversing
can be activated in the Infotainment menu
›
Turn on the ignition and press the desired memory button
›
Turn the rotary knob for the exterior mirror control to the position for the
front passenger mirror area » page
›
Engage reverse gear.
›
Adjust the front passenger's mirror to the desired position.
›
Disengage reverse gear. The set position of the exterior mirror is stored.
Retrieving the saved setting
›
With the ignition off and the driver's door open-press- the desired memory
button B.
›
In other cases (e.g. if the ignition is switched on or the driver's door closed),
hold the button.
Stopping the ongoing adjustment
›
Press any button on the driver's seat or the button on the remote control
key.
Fig. 65
SET button and memory buttons
» Fig. 65.
→  → Mirrors and wipers.

» Fig. 65.
B
74.
Seats and head restraints

77