With WLAN activated, a list of available or previously connected hotspots with
the following information and function surfacesis displayed
Searching for available hotspots
A
Turn Infotainment WLAN on/off
B
Manual hotspot search and connect
C
Automatic establishment of the secure connection to the hotspot via WPS
D
(Applies to Infotainment Amundsen)
Functional surfaces of the available hotspots
E
Disconnection from the currently connected hotpot by deleting the Info-
F
tainment memory access password (The functional surface will only be
shown when connected)
Current connection
Wi-Fi strength of the external device
Connect
▶
Turn on Infotainment in the device.
▶
Show the list of available hotspots, if necessary, update the list by tapping
the function surface Find.
▶
Select the desired hotspot.
▶
If the access to the hotspot is password protected, then enter the required
password.
Search for connection manually and connect
▶
Turn on Infotainment in the device.
▶
Display list of available hotspots.
▶
Tap on the function surface Manual settings and set the required hotspot pa-
rameters.
▶
Tap the function surface Connect.
▶
If the parameters for the search are set correctly and the hotspot is available,
then the connection will take place.
Establish secure connection using WPS (applies to Infotainment Amundsen)
▶
Turn on Infotainment in the device.
▶
In the external device, turn on the option to connect to the external device
via WPS.
▶
Press the
button, then tap on the function surface Tap on→ WLAN →
Mobile hotspot → WPS quick connection (WPS button).
End connection to the hotspot
▶
Press button when the desired Hotspot (WLAN) is found
tion surface → → WLAN → WLAN → Delete.
164
Infotainment
Data connection
» Fig.
194.
Using the data connection, Infotainment can be connected to the Internet. The
data connection can be established in one of the following ways.
Data connection via WLAN
›
Connect Infotainment to the hotspot of an external device with activated da-
ta services
external device.
Data connection using the SIM card in the external module (applies to
Infotainment Columbus)
›
Insert a SIM card with activated data services in the external module
» page
Data connection using rSAP (applies to Infotainment Columbus)
›
Connect Infotainment via Bluetooth
ted data
CAUTION
When inserting an incorrectly sized SIM card, there is a risk of damage to the
CarStick device.
Note
The Internet connection may be chargeable based on the terms and conditions
of your data provider.
,then the func-
» page
163, Connect Infotainment to the hotspot (WLAN) of the
154, Use the SIM card in the external module.
®
profile rSAP to a telephone with activa-
services» page
155, rSAP.