Fig. 339 Inner part of the light: Basic light/light with LED diodes
Read and observe
and
Outer part of the lamp
›
Rotate the version with the light bulb
move it from the lamp housing.
›
Push the faulty bulb into the holder, turn in anti -clockwise direction up to
the stop and remove.
›
Insert a new bulb into the holder and turn in a clockwise direction to the
stop.
›
Replace the holder with the bulb into the lamp housing and turn in a clock-
wise direction to the stop.
Inner part of the light
›
Unscrew the lamp holder
» Fig. 338
kit, and remove the lamp holder from the light assembly.
›
Turn the respective light bulb
» Fig. 339
remove it from the bulb holder.
›
Insert a new bulb into the holder and turn in a clockwise direction to the
stop.
›
Insert the bulb holder into the light and screw in.
on page 282 first.
» Fig.
338counter-clockwise and re-
B
with the screwdriver from the car tool
until it stops counter-clockwise and
Replacing the bulbs in the tail lamp assembly - Variant 2
Fig. 340 Outer part of the light: Basic light/light with LED diodes
Read and observe
and
›
Turn the socket with the bulb
›
Remove the socket with the bulb from the lamp housing in the direction of
arrow
.
2
›
Push the faulty bulb into the holder, turn in anti -clockwise direction up to
the stop and remove.
›
Insert a new bulb into the holder and turn in a clockwise direction to the
stop.
›
Reinsert the holder with the bulb into the lamp housing and turn in the op-
posite direction of the arrow
1
on page 282 first.
in the direction of
» Fig.
340.
B
1
to the stop.
Fuses and light bulbs
287