Skoda Octavia Owner's Manual page 174

During input, destinations are shown in area
spond to the instructions.
If route guidance e.g. Is required in a car park or restaurant which is close to
the chosen destination, then the Nearby function surface must be tapped in the
destination details of the chosen destination. Then search for and select the
desired destination.
Description of the function surfaces
Choice of search
A
 - Searching for a destination or POI (point of interest) by name
 - Search for a point along the route (only works with active route guid-
ance)
 - Searching for a destination near the entered destination (after selec-
tion in destination details » page
Input line
B
Depending on whether a mark is in the entry line, the following menu is
C
displayed.
 - View a list of visited locations corresponding to the entered charac-
ters » Fig. 205 - 
 - Choose the type of destination search / destination entry (no charac-
ter is entered)
▶
Find - Destination / POI search
▶
Address - Enter destination via the address
using the address
▶
On map- Enter destination via the map point / using the GPS coordinates
» page 173
List of last destinations (no character is entered) / List of visited destina-
D
tions
Alphanumeric keypad
E
List of visited destinations
▶
To display the list of visited destinations
surface  .
In the list of visited destinations, there is a maximum of 6 destinations shown,
each is identified with a letter. Then these destinations are shown in the map
with the icon  and a letter, which coincides with the letter in the list of desti-
nations visited.
172
Infotainment
» Fig. 205 that best corre-
D
» Fig. 205
179)
» Fig. 205
» page 172, Enter destination
» Fig. 205 - , tap on the function
Enter destination using the address
Fig. 206 Enter destination using the address: Main menu / list of visited
locations
Display main menu
›
Route guidance is disabled - From the navigation main menu, the function
surface  .
›
Route guidance is enabled - From the main menu navigation, tap on the
function surface  → Enter destination.
›
If the destination entry menu » Fig. 206
then tap on the function surface  → Address.
Enter destination
›
Enter the destination address and then confirm.
Relevant names (e.g. Place/street names) are offered in the entry line during
entry, depending on the context. Previously entered names are offered on a
preferential basis.
The location of the destination offered, which is specified in the entry line in
parentheses, can be displayed in the map by tapping the function surfaceMap.
List of locations visited
There is a possibility that a map with a list of places of the same name will be
displayed during entry» Fig. 206
The list of places visited can also be called up during address entry by pressing
the function surface  .
In the list of visited locations, there is a maximum of 6 locations shown,
marked with a letter. Then, these places are marked with the symbol
map and a letter, which coincides with the character in the list of visited loca-
tions.
-  is not shown using the address,
- .
in the

