Tyre Pressure Monitoring - Skoda Octavia Owner's Manual

Hide thumbs Also See for Octavia:
Table of Contents

Advertisement

WARNING
The general information relating to the use of assistance systems must
be observed
» page 199,
in section Introduction.
For the driving ability is always the driver's responsibility. Never drive if
you feel tired.
The system may not detect all cases where a break is needed.
Therefore, take regular, sufficient breaks during long trips.
There will be no system warning during the so-called micro-sleep.
Note
In some situations, the system may evaluate the driving incorrectly and thus
mistakenly recommend a break (e.g. sporty driving, adverse weather condi-
tions or poor road conditions).
The system is designed primarily for use on motorways.

Tyre pressure monitoring

Introduction
This chapter contains information on the following subjects:
Storing the tyre pressure values and Infotainment display
The tyre pressure monitoring function (hereinafter referred to as the system)
monitors the tyre pressure while driving.
If the tyre inflation pressure changes, the warning
strument cluster and an audible signal
The system can only function properly if the tyres have the prescribed inflation
pressure and these pressure values are stored in the system.
The tyre pressure values are always stored in the system if one of the fol-
lowing events occurs.
Change of tyre inflation pressure.
Change one or more wheels.
Change in position of a wheel on the vehicle.
The warning light
lights up in the instrument cluster.
light
lights up in the in-
sounds» page
35.
WARNING
The general information relating to the use of assistance systems must
be observed
» page 199,
Having the correct tyre inflation pressure is always the driver's responsi-
bility. Tyre inflation pressure must be checked regularly
The system cannot warn in case of very rapid tyre inflation pressure loss,
e.g. in case of sudden tyre damage.
Before storing the pressure values, the tyres must be inflated to the
specified inflation pressure
saved, the system may also not issue a warning even if the tyre inflation
pressure is too low.
CAUTION
To ensure proper system function, the tire pressure values must be stored ev-
ery 10 000 km or 1x a year.
Storing the tyre pressure values and Infotainment display
229
Read and observe
Procedure for storing the tyre pressure values
Inflate all tyres to the prescribed pressure.
Turn on the ignition and switch on Infotainment.
Press the
button in Infotainment and then tap on the function interfaces

on the screen  → Veh. status.
Use the function interfaces   Select the menu item Tyre Pressure Loss In-
dicator.
Tap on the function surface  
In addition, follow the instructions that appear on the screen.
in section Introduction.
» page
» page
261. If incorrect pressure values are
Fig. 269
Button for storing / Example of
screen display: it indicates a
front left tire pressure change
and
on page 229 first.
» Fig.
269.
Assist systems
261.
229

Advertisement

Table of Contents
loading

Table of Contents